 |
AC
POWER SUPPLY / FREQUENCY CONVERTER
INVERTER
UNINTERRUPTIBLE
POWER SUPPLY (UPS)
MODIFIED
STANDARD PRODUCTS
RAILROAD
SIGNAL SOURCE
APPLICATION
NOTES MAGAZINE ARTICLES
WILD
FREQUENCY INFORMATION CENTER
N.I.
® LabView Drivers
|
 |
|
AC POWER SUPPLY
FREQUENCY CONVERTER / INVERTER
|
|
BL HP SERIES
High Power AC Power Supplies
/ Frequency Converters / Inverters without the High Price
|
|
|
Behlman's high power, AC Power Sources / Frequency Converters
/ Inverters, combine the smooth, clean power of a linear supply
with the compact design of a switching power supply. They're about
one-third the size and half the cost of other AC Sources. All
models come standard with variable voltage and frequency, external
sync and 0-10 Vdc remote control, optional IEEE488 or RS232 interface
for computer controlled. LabWindows and LabView drives available.
Small size, quiet operation and high efficiency make the high
power BL Series ideal choices for precision avionics, ATE and
industrial products testing requirements.
Features
-
Compact and rack mountable, 67%
smaller than competitive units
-
Low cost per VA
-
Computer controlled waveform switching
delivers smooth, efficient power
-
Multi-pulse input transformer
offers low harmonic distortion
-
Available with an IEEE488/RS232
interface
-
LabWindows compatible
-
LabView compatible
|
Click
here for printable 
Specifications Sheet.
|
Specifications
|
|
Input
|
|
Voltage: |
See Model
Selection Guide |
| Frequency: |
47-63Hz
(Contact factory for additional frequency options) |
| Input Transformer: |
Multi-Pulse for low
input current THD |
|
Output |
|
Voltage: |
See
model information |
|
Maximum
Power: |
See
model information |
|
Current
Crest Factor: |
3:1 |
|
Distortion: |
3%
THD Typical |
|
Efficiency: |
80%
Typical |
|
Frequency: |
45-500Hz
(Optional 45-1000Hz) |
|
Maximum
Current: |
See model
information |
|
Regulation: |
±
0.1% for ± 10% line change, ± 0.7% no load to full load |
|
Protective Circuits
|
| Input Protection: |
Fast acting main circuit
breaker |
| Constant Current Mode: |
Overload automatically
causes voltage foldback to provide maximum current without distorting
output waveform |
| Thermal Protection: |
Internal temperature
sensor prevent heat damage |
| Short Circuit Protection: |
Short circuit overload
electronically latches output open to protect load. Power restored
by cycling circuit breaker |
|
Control Inputs
|
| Voltage/Frequency: |
0-10Vdc programming-voltage/frequency |
| External Synch: |
Synchronizes AC output
with external input |
| Optional: |
IEEE/RS232 interface
for remote programming of output voltage and frequency |
Front Panel Control
|
Mechanical &
Environmental
|
| Dimensions: |
See model information |
| Weight: |
See model information |
| Output Connections: |
Rear mounted barrier
strip |
| Operating Temperature: |
0 to 55 degrees C |
|
Model
Selection Guide
|
|
Model Optional Inputs
|
| Config.: |
C-1 |
C-2 |
C-3 |
C-4 |
C-5 |
C-6 |
C-7 |
C-8 |
C-9
/C10 |
C-9A |
| Voltage: |
120/208 |
220/380 |
277/480 |
200DELTA |
346/600 |
230/400 |
240/415 |
115 /230 (2) |
230/480 1phase
(3) |
230 1phase
(4) |
|
Output |
|
Model
|
Power
|
Voltage |
Phase |
Current
|
Mech. Config.
|
|
BL3100(1)
|
3KVA |
0-135 |
1
|
22.0 Amps |
1
|
|
BL5100(1)
|
5KVA |
0-135 |
1
|
37.0 Amps |
2
|
|
BL7000(1)
|
7KVA |
0-135 |
1
|
52.0 Amps |
2
|
| |
|
BL3200(1) |
3KVA |
0-270 |
1
|
11.0 Amps
|
1
|
|
BL4500(1) |
4.5KVA |
0-270 |
1
|
17.0 Amps
|
2
|
|
BL6000(1) |
6KVA |
0-270 |
1
|
22.0 Amps
|
2
|
|
BL9200(1) |
9KVA |
0-270 |
1
|
33.0 Amps
|
2
|
| BL12000 |
12KVA |
0-270 |
1
|
44.0 Amps
|
3
|
| |
|
BL3X350
|
1KVA
|
0-135 |
3
|
2.6 Amps/ph |
4
|
|
BL3300(1)
|
3KVA |
0-135 |
3
|
7.5 Amps/ph |
1
|
|
BL5000(1)
|
5KVA |
0-135 |
3
|
12.5 Amps/ph |
2
|
|
BL10000(1)
|
10KVA |
0-135 |
3
|
25.0 Amps/ph |
2
|
|
BL15000
|
15KVA |
0-135 |
3
|
37.0 Amps/ph |
3
|
|
BL20000
|
20KVA |
0-135 |
3
|
50.0 Amps/ph |
3
|
Mechanical Configurations:
1: 2-19" rack mounted chassis 7" & 3.5"Hx22"D,
150 lb.
2: 2-19" rack mounted chassis 7" & 8.75"Hx22"D,
250 lb.
3: High strength rack cabinet with casters 28.3"H x 31.6"D
x 22.1"W, 425lb.
4:
1 – 19” rack mounted chassis 7” H X 22”D. 65 lbs. Available
with C8 Input.
|
Model Options |
| Options |
Description
|
| CE |
CE
Mark |
| E |
Extended
frequency range, 45-1000 Hz. |
| L |
Locking
pots |
| MA |
Mounting
Angles (2 per chassis) |
| R |
Ruggedized
for use in areas with shock and vibration. |
|
MT |
Motor
Test Option (Not available on 12000 and 20000) |
| S1 |
Slides
for Mechanical Specifications 4 |
| S3 |
Slides
for mechanical configuration 1. |
| S10 |
Slides
for mechanical configuration 2. |
| I
/ IR |
(I)
IEEE-488 interface or (IR) RS232 interface |
| T1D |
0-135
& 0-270 VAC L-N on BL3x350 (adds 3.5” chassis) |
| T3D |
0-135
& 0-270Vac L-N on 3300, add 3.5"H chassis |
| T31D |
0-135
& 0-270 VAC on BL3100 (adds 7” chassis) |
| T5 |
0-300Vac
L-N on 5000, add 7"H chassis |
| T5D |
0-135
& 0-300Vac L-N on 5000, add 7"H chassis |
| T51D |
0-135
& 0-270 VAC on BL5100 (adds 7” chassis) |
| T10 |
0-300Vac
L-N on 10000, add 7"H chassis |
| T10D |
0-135
& 0-300Vac L-N on 10000, add 7"H chassis |
| T15 |
0-300
VAC L-N on BL15000 |
| T20 |
0-300Vac
L-N on 20000 |
| T20D |
0-135
& 0-300 VAC on BL20000 |
| V |
Fixed
output voltage (ie 115 ) |
| F |
Fixed
output frequency (ie 400) |
| 21-00 |
Cabinet
with casters |
Note:
(1): Models with motor test option add -MT (See below).
(2): Single Phase,
Not available on all models, consult factory.
(3) C-9 & C-10 for Models BL4500, BL5000,
BL5100, BL6000 & BL7000 includes
option 21-00
cabinet See mechanical
specification 3.
(4) C9A for Models
BL4500, BL5000 & BL5100 in the 8.75” chassis
|
Please
note that Option MT includes all of the specifications of the
standard BLHP Series plus the following to features to meet the
requirements for motor testing:
-
Overload
protection prevents output distortion to drive motors with
pure sinewave, even during start up.
-
"Soft
Start" allows starting motors in "locked rotor"
condition by folding back the voltage and slowly increasing
it as the motor starts to accelerate.
-
Capable of starting motors
which normally require 140Amps locked rotor starting currents.
|
|
 |
 |
