 |
AC
POWER SUPPLY / FREQUENCY CONVERTER
INVERTER
UNINTERRUPTIBLE
POWER SUPPLY (UPS)
MODIFIED
STANDARD PRODUCTS
RAILROAD
SIGNAL SOURCE
APPLICATION
NOTES MAGAZINE ARTICLES
WILD
FREQUENCY INFORMATION CENTER
N.I.
® LabView Drivers
|
 |
|
AC
POWER SUPPLY
FREQUENCY CONVERTER / INVERTER
|
P1351
Power Passport
World
Wide AC Power Supply / Frequency Converter / Inverter on your
bench or in your test rack
|
|
Behlman's
P1351 AC Power Supply / Frequency Converter / Inverter delivers
1350 VA of clean, regulated AC power in a 3.5" high bench
top unit, that easily converts to rack mount, for far less cost
than competitive models. The P1351 can simulate any world wide
utility as well as aircraft and shipboard power. Simply select
the required frequency from 45 to 500 Hz, choose a voltage range
either 0-135 VAC or 0-270 VAC, dial up your desired voltage, and
you are ready to test. Options include Remote Control, using either
IEEE-488, RS232 or 0-10 VDC and Extended Frequency range. The
P1351 delivers all the quality features you have come to expect
from Behlman; clean sinewave output with excellent line and load
regulation, high efficiency and low harmonic distortion, in the
industry's most compact size.
|
Click here for
printable  Specifications
Sheet
| Specifications |
|
Power:
|
1350VA
|
| Input |
|
Voltage:
|
120, +/-10%
|
Frequency:
|
47-440Hz
|
|
Output
|
|
Voltage:
|
Dual Range; 0-135
& 0-270VAC, full isolation from input.
|
Frequency:
|
45Hz - 500Hz
|
|
Current:
|
10 Amps from 0 -
135 Volts or 5 Amps from 0 - 270 Volts
|
|
Crest Factor:
|
3:1
|
Power Factor:
|
100% of rated output
into any pwr factor load.
|
|
Distortion:
|
1% Typical THD (measured
at full load, 115VAC, 60Hz.)
|
Load Regulation:
|
+/- 0.7% No load
to full load
|
|
Line Regulation:
|
+/-0.1% for +/-10%
line change
|
Efficiency:
|
|
|
|
|
Input Protection:
|
Fuse.
|
|
Constant Current:
|
Overload automatically
causes voltage fold-back to provide maximum current without
distorting output waveform
|
|
Short Circuit
Protection:
|
Short circuit overload
electronically latches output open to protect load... power
restored by recycling input power
|
|
Thermal Protection:
|
Internal temperature
sensor prevents heat damage.
|
|
Front
Panel Controls & Indicators |
-
Power On/Off
switch
-
Range switch
and Indicator
-
Voltage Potentiometer
-
Two LED's:
Constant Current; Fault
-
Two Digital
Readouts: True RMS Volts, True RMS Amps and Frequency
|
|
|
Mechanical
Specifications |
|
Chassis:
|
High strength bench
top chassis
|
|
Dimensions:
|
3.5" H x 17"W x
17.5"D
|
|
Weight:
|
39 lbs
|
|
Operating Temperature:
|
0 Deg C to +55 Deg
C
|
|
Input Connector:
|
IEC 320 C-20 receptacle
with 6 foot line cord with NEMA 5 - 15 plug
|
|
Output Connection:
|
Three
safety sockets on front panel and enclosed terminal block on
rear
|
|
Air Flow from
Internal Fans:
|
Input: Sides,
Output: Rear
|
|
Options
|
|
A:
|
Analog remote control:
0-10 Vdc for Volts & Frequency, contact closure for range
& output
|
|
E:
|
Extended Frequency:
45 - 1000 Hz
|
|
I:
|
IEEE - 488, GPIB
interface
|
|
IR:
|
RS232 interface
|
|
L:
|
Locking pots, Volts
and Frequency
|
|
RM:
|
|
|
 |
 |
