 |
AC POWER SUPPLY / FREQUENCY CONVERTER
• Switching
• Linear
INVERTER
UNINTERRUPTIBLE POWER SUPPLY (UPS)
MODIFIED STANDARD PRODUCTS
COTS CUSTOM POWER SUPPLY
• AC-DC
• DC-DC
RAILROAD SIGNAL SOURCE
NEW PRODUCTS
APPLICATION NOTES
WILD FREQUENCY INFORMATION CENTER
|
 |
AC POWER SUPPLY
FREQUENCY CONVERTER / INVERTER
|
P1350 CE
Power Passport
Power Supply CE marked World Wide AC Power Supply
/ Frequency Converter / Inverter on your bench or in your test
rack
|
|
|
Behlman's P1350-CE AC Power Supply / Frequency
Converter / Inverter, delivers 1350VA of clean, regulated AC power
in a 5.25" high bench top unit, that easily converts to rack
mount, for far less cost than competitive models.
The Power Passport CE can simulate any world wide utility
as well as aircraft and shipboard power. Simply select the required
frequency, 50Hz, 60Hz or 400Hz, choose a voltage range, dial up
your desired voltage, and you are ready to test.
The Power Passport CE delivers all the quality features
you have come to expect from Behlman; clean sinewave output with
excellent line and load regulation, high efficiency and low harmonic
distortion, in the industries most compact size.
|
Click here for
printable  Specifications Sheet
| Specifications |
|
Power:
|
1350VA
|
|
Input
|
|
Voltage:
|
230VAC,
+/-10%
|
Frequency:
|
47-440Hz
|
| |
|
Output
|
|
Voltage:
|
Dual
Range; 0 - 135 & 0 -270VAC, full isolation from input.
|
Frequency:
|
50Hz,
60Hz or 400Hz
|
|
Current:
|
10
Amps from 0 - 135 Volts or 5 Amps from 0 - 270 Volts
|
|
Crest Factor:
|
3:1
|
Power Factor:
|
100%
of rated output into any power factor load.
|
|
Distortion:
|
1%
TypicalTHD (measured at full load, 115VAC, 60hZ).
|
Load Regulation:
|
+/-1.0%
No load
to full load
|
|
Line Regulation:
|
+/-0.1%
for +/-10%
line change
|
|
|
Protective Circuits
|
| Input Protection: |
Fuse. |
| Over Current: |
Overload automatically causes voltage
foldback to provide maximum current without distorting output
waveform |
| Short Circuit Protection: |
Short circuit overload electronically
latches output to protect load. Power restored by cycling input
power. |
| Thermal Protection: |
Internal temperature sensor prevents
heat damage. |
|
Front
Panel Meter and Controls
|
-
Power on/off switch
-
Frequency Select Switch
-
Range switch
-
Volts potentiometer
|
- Meter for Volts readout
- Fault indicator
- Schuko receptacle
- NEMA 5-15 receptacle
|
|
Mechanical
Specifications
|
|
Chassis:
|
High
strength bench top chassis
|
|
Dimensions:
|
5.25"
H x 17.5"D x 17"W
|
| Weight: |
75 lbs |
|
Operating
Temperature:
|
0
Deg C to +50 Deg C
|
|
Input
Connector:
|
IEC
320 C-20 receptacle
|
|
Output
Connection:
|
European
"Schuko" receptacle and NEMA 5-15 areceptacle.
|
| Supplied
with 1 meter line cord with IEC320 plug and unterminated end.
|
|
Options
|
|
A001:
|
Adapter, "Schuko"
to NEMA 5-15R
|
|
A002:
|
Adapter, "Schuko"
to NEMA 6-15R
|
|
A003:
|
Adapter, "Schuko"
to UK 1-13R
|
|
A004:
|
Adapter, "Schuko"
to Swiss SW 1-10R
|
|
A005:
|
Adapter, "Schuko"
to Italian IT 1-10R/16R
|
|
A006:
|
Adapter, "Schuko"
to Australian AU 1-10R
|
|
EXW:
|
Extended Warranty
for up to 2 additional years
|
|
L:
|
Locking pot
|
|
LC001:
|
One meter line
cord, IEC-320 plug with unterminated end
|
|
RM:
|
Rack Mounting Kit
|
|
RO:
|
Rear Output NEMA
5-15 Receptacle
|
|
TB:
|
Rear output terminal
block
|
|
 |
 |
