Behlman Electronics, Inc. has developed a new engineering standard, VPXtra® 6U VITA 62 VPX, AC and DC VPX power supplies, that supports the design, manufacture, operation and cooling of high-density COTS DC-DC power supplies and a COTS AC-DC front end module.
Behlman VPXtra® series COTS power supplies are rugged, reliable, conduction cooled, switch mode units built for high-end industrial and military mission critical applications including airborne, shipboard, ground and mobile.
Behlman has the ability to reconfigure its standard units to meet customer requirements without the cost of full-custom development.
For a complete list of our VPX Power Supplies, (use password provided by Behlman) Click here
|Model||Power (W)||Main Output Volts (DC)||Auxiliary Output Volts (DC)||Cooling*||Input Voltage||Dimensions||Comments|
|VPXtra1000CD5 Spec. sheets||1050||12V@83.3A||3.3V@15A||Conduction||18 to 36 VDC||(6U) 9.19”L x 6.64”W x .97”H||Click on the model # to view full spec sheets|
|VPXtra1000CD5-IQI Spec. sheets||1050||12V@83.3A||3.3V@15A||Conduction||18 to 36 VDC||(6U) 9.19”L x 6.64”W x .97”H||Developed in alignment with SOSA™ Technical Standards|
|VPXtra1000CM5 Spec. sheets||1000||12V@45A, 5V@80A||3.3V@15A, +12V@1A, -12V@1A||Conduction||18 to 36 VDC||(6U) 9.19”L x 6.64”W x .97”H||Click on the model # to view full spec sheets|
|VPXtra1000CM5-IQI Spec. sheets||1000||12V@45A, 5V@80A||3.3V@15A, +12V@1A, -12V@1A||Conduction||18 to 36 VDC||(6U) 9.19”L x 6.64”W x .97”H||Click on the model # to view full spec sheets|
|VPXtra1500CS Spec. sheets||1500 Watts @ 230VAC I/P or 1000 Watts @ 120VAC I/P||33V@46A||3.3V@0.2A||Conduction||115/200 VAC +/- 20% Wye or 115 VAC +/- 20% Delta Three-phase, 47-440 Hz||(6U) 9.19”L x 6.64”W x .97”H||Click on the model # to view full spec sheets|
|VPXtra1500CS3 Spec. sheets||1500 Watts @ 230VAC I/P or 1000 Watts @ 120VAC I/P||33V@46A (with 220VAC Input)||3.3V@0.4A||Conduction||85-265 VAC, 1ø, 47-440 Hz||(6U) 9.19”L x 6.64”W x .97”H||Click on the model # to view full spec sheets|
|*Other cooling methods are available|
|To request more detailed Datasheets, click|
The Behlman VPXtra® series of COTS AC to DC and DC to DC power supply are rugged, highly reliable, conduction cooled, switch mode unit built for high-end industrial and mission critical military applications.
The VPXtra® power supplies have no minimum load requirement and have overvoltage and short circuit protection as well as over current and thermal protection. The power supplies are designed to support the rigors of mission critical airborne, shipboard, vehicle and mobile applications.
Designed and manufactured with Xtra-Coolingä technology, Xtra-Reliableä design and Xtra-Ruggedä construction makes the Behlman VPXtra® your best choice.
Rugged, reliable and easy to use for a variety of applications:
Voltage: 18 to 36 VDC
115/200 VAC, 3 phase, 47-440Hz
85-265 VAC, 1-phase, 47-440Hz
Power: 1000-1500 Watts
Voltage/Current: See individual specifications
Auxiliary: See individual specifications
Line Regulation: See individual specifications .
Load Regulation: See individual specifications
PARD-Ripple & Noise: 50mV p.p. max
Efficiency: 90% typical at full load
91% typical at half load
Over Voltage: 120% typical
Over Current: 120% typical
Over Temp Warning: See individual specifications
Over Temp: See individual specifications
Inhibit: Output Off- active low
Enable: Input On- active low
INDICATORS (Four LED’s for the following):
Input OK: Green
Output Enable: Green
Output Fault: Red
Over Temp: Red
Input to Output: 1250 VDC
Input to Case: 1250 VDC
Output to Case: 100 VDC
MTBF IAW MIL HDBK-217F Notice 2: 336,000 hrs.
ENVIRONMENTAL (Temperature at card edge)
Temperature: (IAW VITA 47)
Operating: (CC3) -40°C to +71°C and 85°C
Storage: -40°C to +105°C
MECHANICAL (1.0 inch pitch)
Dimensions: 9.19”L x 6.64”W x .97”H
Weight: 3.5 lbs
Input Connector: P0-IAW O&C drawing 241XX unit dependent
Output Connector: P1-IAW O&C drawing 241XX unit dependent
Designed to meet the following MIL Standards